Rohini, New Delhi, Delhi
Send E-mail
Send SMS
Home»Our Products»

Insulation Spares

Offering you a complete choice of products which include insulation products, flexocoat 2216 base / hardener, glass epoxy sheet, insulation spares, asbestos mill board and teflon sheet.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm technology helps develop that utilized energy more efficiently, require low maintenance, with zero compromise on safety and long-term perlorniiint e and we continue lo innovale. Whether you are m Ihe oil and gas, automotive, t hemic .il, agricultural, rkxI processing, manufacluring, or maintenance businesses, there's an industry - leading lawatherm material suited lo Ihe job you need lo gel done. Lawatherm has readily available in-depth stocks ol a wide range of insulation products including someot Ihe best brands i.e. Lebond, Dupont, Dr.Beck, Thermosil, Arco, Champion, Charminarelc.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is a specially designed durable, high dielectric insulating material, which replaces old style epoxies, polyster and varnishes insulation systems. Application of these materials is crucial. This is why special heating equipment to properly cure the insulation is required with these materials. Utmost care should be given to apply the material to provide uniformity of application.

Maximum precaution is taken to insure that the first layer of insulation is applied to the accurate amount of thickness and properly cured before the second coat is applied. If the first coating is too thick or not properly cured, "outgassing" can occur, causing turn to turn arcing and premature failure of the coil. Special high-voltage electrical tests are carried out on the entire coil to insure the integrity of the insulation. Lebond 2216 has been heated to450°F and subjected to high voltage non-destructive tests [up to 6000 Volts DC] with no indication of failure. Flexocoat lebond 2216 for coating induction coils of electric induction furnace, it has excellent adhesion on copper and stainless steel desired flexibility to withstand cooling and heating cycles normally encountered during operation of furnaces and provides electrical resistance to voltage developed between the coils to protect from sparking, upto approximately 400 volts/ mill. Thickness of coating.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawalherm manufactures Fiberglass products (Epoxy and Polyester) in various sizes and shapes of Sheet, Flats icoil Support/Bar), Rods, Tubes, Spacer, Angles & sections. These sections being made from epoxy resin and glass fibers combined together give an excellent performance that combine high strength and excellent electrical insulating characteristics for use in a variety of applications where electrical insulation and non- corrosive material is required in the electrical and thermal insulation industry. The company believes In 'providing satisfactory solutions and assistance' to the clients. With zeal to achieve c onsistent growth, the company strives on customer satisfaction as its main motto. A variety of custom built sections can also be made upon demand of thee ustomer.

Grades

C-t0andG-l I (GlassCloth/EpoxyResinl This glass epoxy laminates are specified for their extremely high stability over temperature, G-10and G-ll are used for terminal Board, insulation in electro magnet separators, High humidity applications, LV and HV circuit breakers. Electric Rotor Insulations, and where strength to size ratio is critical, G-10 is stronger while G-ll is a better insulator and can take higher temperature.

  • FR-4 (Glass Cloih / Epoxy Resin)
  • FR-4 is Fire Retardant G-IOGIass Epoxy laminates
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm manufactures Mica products in various size* and shapes of Sheet, Rods, Tubes, FapesfPSAl, Spacer, Half round mica turn & also lifting magnet insulation spares.

Composition

It consists of several layers of muscovite mica paper impregnated with silicone binder pressed under heat & pressure to yield plate / board having excellent mechanical, thermal and electrical properties.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode ami in arc furnace* and ladle furnaces
  • High temperature insulation between coil and crucible In induction furnaces
  • Insulation in dynamic braking resistors used in lacomolives
  • Applications requiring high voltage resistance at high tern peral ures
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

This is a versatile, thermal Insulation and heat-resistant material produced in sheet form using good quality asbestos fibres, incombustible fillers and vegetable binders. It does not suffer loss of strength upto 4B5CC. When suitably supported ihe lioard can be used satisfactorily at extreme temperatures upto approx. M00DC.

Service

For all kinds of thermal insulations ranging from domestic cookers and ironing boards lo industrial applications sue h as glass moulding, ovens and furnaces and domestic stoves. As the sheets can be bent to any diameter with a little moisture, they are most suitable for large diameier pipe cladding.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is one stop shop lot electr ic al insulating materials and i ompnsites of Engineering Plastic Products. The Teflon IPTFE resin skiver!) sheit aie highly dielectric, chemical resistant and not ageing. They have a wide range of operation temperature range between -260"C to 260 "C. Over a scientific study done a vast range of component which have excellent property of flouro liased which show excellent mechanical behavior like hardness, longitudinal strength, mechanical strength and specially chemically inert for both type of reaction whether acidic or basic. Teflon tPTFE resin skived) sheet are available in continuous rolls or cut to the desired length. Composite materials in Ihe form of Sheets, Boards, Hollow Pipes, Solid Geometrical Profile are used for making fabricated parts as pet customer Requirements. These process may Involve Cutting, Turning, Sawing, Shearing, Punching, Dowelling, Chamfering, Thickessing, Scarfing, Drilling, Shaping, Routing, Scoring, Milling, Grinding, Tapping, Threading Pasting finishing packing etc. all operation being performed by skilled person with advance technology machines. A detailed quality check from procurement of raw material to in process and then at final product level is done to ensure fitment to use as per customer expectation. Available machined components matched to exact specification/drawings.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • PSA Tape consist ofmica paper backed with Pel-film & has pressure sensitive adhesive coaled on polyester film side of the tape. Properties
  • PSA Tape has excellent electrical and mechanical properties. The smooth surfaced the product enables easy processingon automatic machines.
  • Application
  • PSA Tape is very flexible & promotes easy winding on coil. e.g-Main coils of Induction furnaces.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature
450 °C (Max)
Density (Kg/m3)
1900
Thermal Conductivity (W/m OK)
0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Frp (Fire Retardant Proof) Products

Lawatherm manufactures Fiberglass products (Epoxy and Polyester) in various sizes and shapes of Sheet, Flats (coil Support/Bar), Rods, Tubes, Spacer, Angles & sections. These sections being made from epoxy resin and glass fibers combined together give an excellent performance that combine high strength and excellent electrical insulating characteristics for use in a variety of applications where electrical insulation and non- corrosive material is required in the electrical and thermal insulation industry. The company believes in 'providing satisfactory solutions and assistance' to the clients. With zeal to achieve consistent growth, the company strives on customer satisfaction as its main motto. A variety of custom built sections can also be made upon demand of the customer.

Grades

G-10 and G-11 (Glass Cloth / Epoxy Resin) This glass epoxy laminates are specified for their extremely high stability over temperature, G-10 and G-11 are used for terminal Board, insulation in electro magnet separators, High humidity applications, LV and HV circuit breakers, Electric Rotor Insulations, and where strength to size ratio is critical, G-10 is stronger while G-11 is a better insulator and can take higher temperature.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is one stop shop for electrical insulating materials and composites of Parmali wood. The Parmali (Densified Laminated) wood boards for insulation application such as coil-clamping rings, pressure/ potential rings, coil supports, spacers, and lead supports etc. Our materials possess extra high voltage insulating characteristics and are used in EHV transformers, large electrical machines, hydro and turbo generators, High voltage switchgears etc. Composite materials in the form of Sheets, Boards, Hollow Pipes, Solid Geometrical Profile are used for making fabricated parts as per customer requirements. These process may involve Cutting, Turning, Sawing, Shearing, Punching, Dowelling, Chamfering, Thickessing, Scarfing, Drilling, Shaping, Routing, Scoring, Milling, Grinding, Tapping, Threading Pasting finishing packing etc. all operation being performed by skilled person with advance technology machines. A detailed quality check from procurement of raw material to in-process and then at final product level is done to ensure fitment to use as per customer expectation. Available machined components matched to exact specification/drawings.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is a specially designed durable, high dielectric insulating material, which replaces old style epoxies, polyster and varnishes insulation systems. Application of these materials is crucial. This is why special heating equipment to properly cure the insulation is required with these materials. Utmost care should be given to apply the material to provide uniformity of application.

Maximum precaution is taken to insure that the first layer of insulation is applied to the accurate amount of thickness and properly cured before the second coat is applied. If the first coating is too thick or not properly cured, "outgassing" can occur, causing turn to turn arcing and premature failure of the coil. Special high-voltage electrical tests are carried out on the entire coil to insure the integrity of the insulation. Lebond 2216 has been heated to450°F and subjected to high voltage non-destructive tests [up to 6000 Volts DC] with no indication of failure. Flexocoat lebond 2216 for coating induction coils of electric induction furnace, it has excellent adhesion on copper and stainless steel desired flexibility to withstand cooling and heating cycles normally encountered during operation of furnaces and provides electrical resistance to voltage developed between the coils to protect from sparking, upto approximately 400 volts/ mill. Thickness of coating.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is a specially designed durable, high dielectric insulating material, which replaces old style epoxies, polyster and varnishes insulation systems. Application of these materials is crucial. This is why special heating equipment to properly cure the insulation is required with these materials. Utmost care should be given to apply the material to provide uniformity of application.

Maximum precaution is taken to insure that the first layer of insulation is applied to the accurate amount of thickness and properly cured before the second coat is applied. If the first coating is too thick or not properly cured, "outgassing" can occur, causing turn to turn arcing and premature failure of the coil. Special high-voltage electrical tests are carried out on the entire coil to insure the integrity of the insulation. Lebond 2216 has been heated to450°F and subjected to high voltage non-destructive tests [up to 6000 Volts DC] with no indication of failure. Flexocoat lebond 2216 for coating induction coils of electric induction furnace, it has excellent adhesion on copper and stainless steel desired flexibility to withstand cooling and heating cycles normally encountered during operation of furnaces and provides electrical resistance to voltage developed between the coils to protect from sparking, upto approximately 400 volts/ mill. Thickness of coating.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawalherm manufactures Fiberglass products (Epoxy and Polyester) in various sizes and shapes of Sheet, Flats icoil Support/Bar), Rods, Tubes, Spacer, Angles & sections. These sections being made from epoxy resin and glass fibers combined together give an excellent performance that combine high strength and excellent electrical insulating characteristics for use in a variety of applications where electrical insulation and non- corrosive material is required in the electrical and thermal insulation industry. The company believes In 'providing satisfactory solutions and assistance' to the clients. With zeal to achieve c onsistent growth, the company strives on customer satisfaction as its main motto. A variety of custom built sections can also be made upon demand of thee ustomer.

Grades

C-t0andG-l I (GlassCloth/EpoxyResinl This glass epoxy laminates are specified for their extremely high stability over temperature, G-10and G-ll are used for terminal Board, insulation in electro magnet separators, High humidity applications, LV and HV circuit breakers. Electric Rotor Insulations, and where strength to size ratio is critical, G-10 is stronger while G-ll is a better insulator and can take higher temperature.

  • FR-4 (Glass Cloih / Epoxy Resin)
  • FR-4 is Fire Retardant G-IOGIass Epoxy laminates
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawalherm manufactures Fiberglass products (Epoxy and Polyester) in various sizes and shapes of Sheet, Flats icoil Support/Bar), Rods, Tubes, Spacer, Angles & sections. These sections being made from epoxy resin and glass fibers combined together give an excellent performance that combine high strength and excellent electrical insulating characteristics for use in a variety of applications where electrical insulation and non- corrosive material is required in the electrical and thermal insulation industry. The company believes In 'providing satisfactory solutions and assistance' to the clients. With zeal to achieve c onsistent growth, the company strives on customer satisfaction as its main motto. A variety of custom built sections can also be made upon demand of thee ustomer.

Grades

C-t0andG-l I (GlassCloth/EpoxyResinl This glass epoxy laminates are specified for their extremely high stability over temperature, G-10and G-ll are used for terminal Board, insulation in electro magnet separators, High humidity applications, LV and HV circuit breakers. Electric Rotor Insulations, and where strength to size ratio is critical, G-10 is stronger while G-ll is a better insulator and can take higher temperature.

  • FR-4 (Glass Cloih / Epoxy Resin)
  • FR-4 is Fire Retardant G-IOGIass Epoxy laminates
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawalherm manufactures Fiberglass products (Epoxy and Polyester) in various sizes and shapes of Sheet, Flats icoil Support/Bar), Rods, Tubes, Spacer, Angles & sections. These sections being made from epoxy resin and glass fibers combined together give an excellent performance that combine high strength and excellent electrical insulating characteristics for use in a variety of applications where electrical insulation and non- corrosive material is required in the electrical and thermal insulation industry. The company believes In 'providing satisfactory solutions and assistance' to the clients. With zeal to achieve c onsistent growth, the company strives on customer satisfaction as its main motto. A variety of custom built sections can also be made upon demand of thee ustomer.

Grades

C-t0andG-l I (GlassCloth/EpoxyResinl This glass epoxy laminates are specified for their extremely high stability over temperature, G-10and G-ll are used for terminal Board, insulation in electro magnet separators, High humidity applications, LV and HV circuit breakers. Electric Rotor Insulations, and where strength to size ratio is critical, G-10 is stronger while G-ll is a better insulator and can take higher temperature.

  • FR-4 (Glass Cloih / Epoxy Resin)
  • FR-4 is Fire Retardant G-IOGIass Epoxy laminates
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm manufactures Mica products in various size* and shapes of Sheet, Rods, Tubes, FapesfPSAl, Spacer, Half round mica turn & also lifting magnet insulation spares.

Composition

It consists of several layers of muscovite mica paper impregnated with silicone binder pressed under heat & pressure to yield plate / board having excellent mechanical, thermal and electrical properties.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode ami in arc furnace* and ladle furnaces
  • High temperature insulation between coil and crucible In induction furnaces
  • Insulation in dynamic braking resistors used in lacomolives
  • Applications requiring high voltage resistance at high tern peral ures
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm manufactures Mica products in various size* and shapes of Sheet, Rods, Tubes, FapesfPSAl, Spacer, Half round mica turn & also lifting magnet insulation spares.

Composition

It consists of several layers of muscovite mica paper impregnated with silicone binder pressed under heat & pressure to yield plate / board having excellent mechanical, thermal and electrical properties.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode ami in arc furnace* and ladle furnaces
  • High temperature insulation between coil and crucible In induction furnaces
  • Insulation in dynamic braking resistors used in lacomolives
  • Applications requiring high voltage resistance at high tern peral ures
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • PSA Tape consist ofmica paper backed with Pel-film & has pressure sensitive adhesive coaled on polyester film side of the tape. Properties
  • PSA Tape has excellent electrical and mechanical properties. The smooth surfaced the product enables easy processingon automatic machines.
  • Application
  • PSA Tape is very flexible & promotes easy winding on coil. e.g-Main coils of Induction furnaces.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • PSA Tape consist ofmica paper backed with Pel-film & has pressure sensitive adhesive coaled on polyester film side of the tape. Properties
  • PSA Tape has excellent electrical and mechanical properties. The smooth surfaced the product enables easy processingon automatic machines.
  • Application
  • PSA Tape is very flexible & promotes easy winding on coil. e.g-Main coils of Induction furnaces.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • PSA Tape consist ofmica paper backed with Pel-film & has pressure sensitive adhesive coaled on polyester film side of the tape. Properties
  • PSA Tape has excellent electrical and mechanical properties. The smooth surfaced the product enables easy processingon automatic machines.
  • Application
  • PSA Tape is very flexible & promotes easy winding on coil. e.g-Main coils of Induction furnaces.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • PSA Tape consist ofmica paper backed with Pel-film & has pressure sensitive adhesive coaled on polyester film side of the tape. Properties
  • PSA Tape has excellent electrical and mechanical properties. The smooth surfaced the product enables easy processingon automatic machines.
  • Application
  • PSA Tape is very flexible & promotes easy winding on coil. e.g-Main coils of Induction furnaces.
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

  • PSA Tape consist ofmica paper backed with Pel-film & has pressure sensitive adhesive coaled on polyester film side of the tape. Properties
  • PSA Tape has excellent electrical and mechanical properties. The smooth surfaced the product enables easy processingon automatic machines.
  • Application
  • PSA Tape is very flexible & promotes easy winding on coil. e.g-Main coils of Induction furnaces.
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature450 °C (Max)
Density (Kg/m3)1900
Thermal Conductivity (W/m OK)0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature450 °C (Max)
Density (Kg/m3)1900
Thermal Conductivity (W/m OK)0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature450 °C (Max)
Density (Kg/m3)1900
Thermal Conductivity (W/m OK)0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature450 °C (Max)
Density (Kg/m3)1900
Thermal Conductivity (W/m OK)0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature450 °C (Max)
Density (Kg/m3)1900
Thermal Conductivity (W/m OK)0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
Save time! Get a Best Deal

*Your information is safe with us.

REQUEST CALLBACK
Ask Latest Price

Product Price: Get Latest Price

Lawatherm is manufacturing syndino products in various size and shapes of sheet, rod, spacer, segment, half round syndino turn, top & bottom. These sheets are available in various sizes from 2mm to 75mm.

Composition

Lawatherm consist of asbestos fiber and cement formed into fully compressed boards under high pressure, mechanically strong, these boards possess good arc and heat resisting characteristics are used for thermal insulation as well aselectrical insulation.

Application

  • Insulation of high temperature heated platens and moulds in hydraulic and presses
  • High temperature insulation of electrode arm in arc furnaces and ladle furnaces
  • High temperature insulation between coil and crucible in induction furnaces
  • Insulation in dynamic braking resistors used in locomotives
  • Applications requiring high voltage resistance at high temperatures

 

 

SpecificationRequirement As per IS:4248Sindhanio 450 Obtained Value
Continuous Operating Temperature450 °C (Max)
Density (Kg/m3)1900
Thermal Conductivity (W/m OK)0.64
Cross-breaking strength (Kg/cm2)Min. 300366
Crushing Strength (Kg/cm2)Min. 10551536
Shear Strength (Kg/cm2)Min. 210437
Deformation under Compression, KgfReduction inReduction in
thickness shallthickness: 2 % |
not be greater
than 5% nor
Yes! I am Interested
X
 

Download Brochure
Explore more products
Printed Circuit Board
Get Best Quote
Hydraulic Relife Valve
Get Best Quote
Gates Hose
Get Best Quote
Industrial Tape
Get Best Quote
Lawatherm Furnace Private Limited

Naveen Chawla(CEO)
No. B-4/77, Sector XI, Rohini
New Delhi - 110085
Delhi, India
Send Email
© Lawatherm Furnace Private Limited. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited